For the square at the end, just run it through a chop saw so that the line is straight. Now that all the details are done, take a piece of 80 grit sand paper and sand from top to bottom once or twice to even the layers. Afterwards take a piece of 200 grit sand paper and run it over the staff until smooth. finally add a layer of wax followed by a light sanding grit 200 grit sand paper 2 or 3 times.Thursday, 24 May 2012
the finish
For the square at the end, just run it through a chop saw so that the line is straight. Now that all the details are done, take a piece of 80 grit sand paper and sand from top to bottom once or twice to even the layers. Afterwards take a piece of 200 grit sand paper and run it over the staff until smooth. finally add a layer of wax followed by a light sanding grit 200 grit sand paper 2 or 3 times.
Subscribe to:
Post Comments (Atom)
You finished! Good work and congratulations on finishing what you started.
ReplyDeleteThis was a really cool post. I just wish that the picture was higher quality so that could see all the work you have done, but in HHHHDDDD
ReplyDeleteGood job on the staff! Hope it turned out how you wanted it to.
ReplyDeleteBlurry.
ReplyDelete